GNSS观测数据ZTD建模的质量控制方法

针对目前基于GNSS观测数据的对流层天顶总延迟(ZTD)模型缺乏有效质量控制手段的现状,提出了一套综合考虑数据量、网格分辨率以及模型稳定性的ZTD建模质量控制方法,并采用内华达大地测量实验室(NGL)解算的高空间分辨率GNSS对流层数据,选取了近十年德国及周边区域[47°N-55°N,5°E-15°E]183个测站的实测ZTD,对该方法进行了校验。实验结果表明:在该质量控制方法下建立的新模型精度稳定,平均均方根误差(RMS)为3.4 cm,相对于UNB3m、EGNOS、GPT2w+Saas平均改善了42.4%、35.8%、33.3%。本文提出的质量控制方法有效提升了基于GNSS观测数据的ZTD模型的性能,对于ZTD建模研究具有一定的参考价值。     

火星大气进入段抗饱和固定时间阻力加速度跟踪制导律设计

研究了具有固定时间收敛特性的火星探测器大气进入段的标称轨迹跟踪制导问题。首先，针对横向运动，给出与速度成线性关系的航向误差漏斗走廊形式，完成了倾侧角的反号逻辑设计。与横程漏斗走廊反号逻辑相比，该逻辑计算量小，更适用于宇航计算机。与航向误差宽度走廊反号逻辑相比，该逻辑在高速状态下能够避免倾侧角的频繁切换，可提高任务成功的概率。其次，针对纵向运动，通过RBF神经网络补偿了倾侧角饱和问题，利用积分滑模设计了阻力加速度固定时间饱和跟踪制导律，其不仅可有效消除滑模控制的抖振问题，且将跟踪误差以两种不同形式引入制导律，能够加速收敛，能够保证跟踪误差在固定时间内快速收敛至0。最后，通过数值仿真验证了所设计的横向倾侧角切换逻辑和纵向制导律对标称轨迹的快速、精确跟踪能力。     

高效能源系统管理与控制技术

能源系统是飞行器的关键技术之一,能源系统性能的优劣对飞行器能否正常飞行及实现预定任务有重要影响。本文针对大功率飞行器对分布式循环能源系统的管理需求,开展高效能源系统管理与控制技术研究,提出一种集逐级调压控制、限流充电控制、恒流输出控制以及最大功率点跟踪(MPPT)控制为一体的层级梯次控制策略,实现分布式系统的全局优化控制和飞行器能源的功率优化调度。研制的能源管理系统(PCU)配备1条234～328 V高压母线,额定功率15 kW,电路效率大于97%,功率密度大于750 W/kg。PCU依托分布式架构,采用层级梯次控制策略,验证了高效能源系统管理与控制技术的正确性和有效性。     

Sliding mode control design for oblique wing aircraft in wing skewing process

When the wing of Oblique Wing Aircraft (OWA) is skewed, the center of gravity, inertia and aerodynamic characteristics of the aircraft all significantly change, causing an undesirable flight dynamic response, affecting the flying qualities, and even endangering the flight safety. In this study, the dynamic response of an OWA in the wing skewing process is simulated, showing that the three-axis movements of the OWA are highly coupled and present nonlinear characteristics during the wing skewing. As the roll control efficiency of the aileron decreases due to the shortened control arm in an oblique configuration, the all-moving horizontal tail is used for additional roll and the control allocation is performed based on minimum control energy. Given the properties of pitch-roll-yaw coupling and control input and state coupling, and the difficulty of establishing an accurate aerodynamic model in the wing skewing process due to unsteady aerodynamic force, a multi-loop sliding mode controller is formulated by the time-scale separation method. The closed-loop simulation results show that the asymmetric aerodynamics can be balanced and that the velocity and altitude of the aircraft maintain stable, which means that a smooth transition is obtained during the OWA’s wing skewing.     

一种未来大型天地往返运输系统平台气动方案

针对未来低运行成本、可直接水平起降、重复使用的大型天地往返运输系统平台飞行器研制所需重点解决的全速域气动力性能需求与气动热防护匹配等难题，分析了典型航天飞机方案所存在的能量运行缺陷等主要问题及可能的改善方案。基于放宽气动热防护设计、涡轮/冲压/火箭发动机三动力组合、嵌套式旋转机翼全速域变体、在爬升阶段将飞行动能转化为高度势能以及再入阶段“跳跃式”盘旋减速飞行轨迹控制等设计思想，从能量损失速率控制和回收利用等角度出发，开展了一种新型大型天地往返运输系统平台气动布局概念设计研究。全速域气动力/热性能工程估算以及内/外流整体气动效能初步分析结果表明，该方案可有效满足整个飞行包线内的升重平衡需求，相比航天飞机方案具有显著的整体气动效能优势，值得进一步开展深入研究。     

A CFD-based numerical virtual flight simulator and its application in control law design of a maneuverable missile model

A CFD-based Numerical Virtual Flight (NVF) simulator is presented, which integrates an unsteady flow solver on moving hybrid grids, a Rigid-Body Dynamics (RBD) solver and a module of the Flight Control System (FCS). A technique of dynamic hybrid grids is developed to control the active control surfaces with body morphing, with a technique of parallel unstructured dynamic overlapping grids generating proper moving grids over the deflecting control surfaces (e.g. the afterbody rudders of a missile). For the flow/kinematic coupled problems, the 6 Degree-Of-Freedom (DOF) equations are solved by an explicit or implicit method coupled with the URANS CFD solver. The module of the control law is explicitly coupled into the NVF simulator and then improved by the simulation of the pitching maneuver process of a maneuverable missile model. A nonlinear dynamic inversion method is then implemented to design the control law for the pitching process of the maneuverable missile model. Simulations and analysis of the pitching maneuver process are carried out by the NVF simulator to improve the flight control law. Higher control response performance is obtained by adjusting the gain factors and adding an integrator into the control loop.     

表贴式永磁同步电机直接转矩控制变幅值预测控制研究

基于以电压矢量幅值为变量的表贴式永磁同步电机(SPMSM)磁链和转矩方程,采用预测控制计算得出施加不同电压矢量幅值的下一时刻磁链和转矩值,选择使磁链和转矩误差目标函数最小的电压矢量幅值作为最优值,从而确定下一时刻施加的电压矢量。仿真结果表明:在电压矢量变幅值预测下,SPMSM直接转矩控制(DTC)系统运行良好,定子磁链轨迹为理想圆,磁链和转矩均符合控制要求,转速跟踪良好,定子电流波形正弦。预测控制需要从备选电压矢量幅值集合中选择最优幅值。理论上,备选电压矢量幅值个数越多,系统优化效果越好,但也带来更大的计算负担。研究了9种等分电压矢量情况下变幅值预测控制系统的控制效果。根据控制效果和计算负担,提出变幅值预测控制将电压矢量幅值三等分较为理想。     

四相横向磁通永磁电机的三电平滞环电流控制

以新型四相横向磁通永磁电机为研究对象,利用MATLAB/Simulink软件平台以及Simpower System工具箱,对闭环控制系统进行了研究。在传统双闭环调速控制基础上,为滞环电流控制环引入零电平,将滞环分为上滞环和下滞环。综合考虑开关频率与电流THD确定合适的滞环环宽,并根据偏差电流值与滞环环宽比较值得到逆变器控制信号。通过仿真得到各种工况下的电机运行数据,说明该控制方法能够对四相横向磁通永磁电机进行有效控制。     

动态时频谱分析、探测和跟踪的随机有限集法

动态出现和消失多分量信号的时频分析问题一直是非平稳信号处理的难点之一。为此，提出了一种分析、探测和跟踪多分量信号的随机有限集法。该算法利用时频变换，如短时傅里叶变换或自适应谱估计法，以及多项式预测模型，将多分量信号的时频分析问题归纳成可利用随机有限集进行多目标追踪的问题。分析表明：借助于提出的初始权重赋值算法，以及谱分量幅度和频率的联合似然函数，就可利用高斯混合概率假设密度滤波器来实现对动态时频谱的分析、探测和跟踪。在仿真实验中，所提算法有效提升了动态时频谱的跟踪精度，其对微弱时频谱分量的探测能力，以及对载频差异的分析能力均优于文献报道的算法。     

Assessment on critical technologies for conceptual design of blended-wing-body civil aircraft

Civil aviation faces great challenges because of its robust projected future growth and potential adverse environmental effects. The classical Tube-And-Wing(TAW) configuration following the Cayley's design principles has been optimized to the architecture's limit, which can hardly satisfy the further requirements on green aviation. By past decades' investigations the BlendedWing-Body(BWB) concept has emerged as a potential solution, which can simultaneously fulfill metrics of noise, emission and fuel burn. The purpose of the present work is to analyze the developments of critical technologies for BWB conceptual design from a historical perspective of technology progress. It was found that the high aerodynamic efficiency of BWB aircraft can be well scaled by the mean aerodynamic chord and wetted aspect ratio, and should be realized with the trade-offs among stability and control and low-speed performance. The structure concepts of non-cylinder pressurized cabin are of high risks on weight prediction and weight penalty. A static stability criterion is recommended and further clear and adequate criteria are required by the evaluations of flying and handling qualities. The difficulties of propulsion and airframe integration are analyzed. The energy to revenue work ratios of well-developed BWB configurations are compared,which are 31.5% and 40% better than that of TAW, using state-of-art engine technology and future engine technology, respectively. Finally, further study aspects are advocated.